11.6" LCD with digitizer for HP ProBook x360 11 G1 EE

Is the 11.6-inch screen on your HP ProBook x360 11 G1 EE (2017-2018) cracked or has the touch layer stopped responding? This complete panel with digitizer is a direct replacement. You'll need a heat gun to soften the adhesive before lifting the old glass off.

Specifications

• Screen size: 11.6 inch
• Resolution: 1366 x 768 HD
• Digitizer: yes, integrated
• Connector: 30-pin eDP
• Housing: black frame
• OEM numbers: B116XAB01.3
• Compatible models: HP ProBook x360 11 G1 EE

Symptoms of a defective part

• Screen stays black but the system boots
• Spider-web cracks or ink blots
• Lines or dead pixels
• Touchscreen no longer responds
• Backlight flickers or dies

Installation

🔴 Difficulty: hard. Plan around 45 minutes. Tools you need: Phillips PH00/PH0, T6 Torx, plastic spudger, heat gun, suction cup, anti-static wristband.

Frequently asked questions

Is the digitizer pre-installed?
Yes, the 11.6-inch panel ships with digitizer and frame just like the original on the HP ProBook x360 11 G1 EE. Plug-and-play swap, no separate touch layer.

Which tools do I need?
A heat gun or iOpener to soften the adhesive, plastic opening picks, a suction cup and a Phillips PH00 driver.

How long does the swap take?
🔴 hard job of roughly 45 minutes because the old adhesive needs to be cleaned off before the new panel is bonded.