Charging port flex cable HP Slate 7

Is the oplaadpoort-flexkabel on your HP Slate 7 (HP Slate 7, ~2013-2014) not working properly anymore? With this plug-in flex cable you replace the charging port without soldering. Drops in 1-to-1 — no changes to cables or housing needed.

Specifications

• Type: micro-USB charging port on flex cable
• Compatible: HP Slate 7 tablet
• Includes connector and data pins
• Plug-in to motherboard, no soldering
• Cable length matches original 1-to-1
• Supports charging + data transfer

Symptoms of a faulty part

• Tablet won't charge or only after wiggling the cable
• USB port feels loose or is crooked
• Data transfer to PC no longer works
• Plug can't be inserted properly anymore

Installation

🟡 Difficulty: medium. Time: about 35 minutes. Tools: plastic opening tools, pick and a small Phillips. Pry the back cover open carefully, disconnect the battery and lift the old port out of its clip.

Frequently asked questions

Does this fit a Slate 7 Plus or Slate 8?
No, this flex is only for the standard Slate 7. The Plus and Slate 8 use different connectors.

Will my fast charger work?
Yes, it's the same micro-USB pinning as the original. The Slate 7 doesn't support quick charge.

Do I need to solder?
No. Plug-in connector on the motherboard.