Camera Flex Cable for HP EliteBook 830 G5 (6017B0899701)

Webcam on your HP EliteBook 830 G5 stopped working or Windows says 'no camera found'? This 6017B0899701 flex cable carries the signal between the camera module and the motherboard — a common failure point after a screen swap or hinge damage.

Specifications

• OEM number: 6017B0899701
• Function: signal flex between camera and motherboard
• Compatible: HP EliteBook 830 G5 (13.3")
• Connector type: ZIF flex
• Routing: along the display hinge
• Type: brand-new replacement part, tested

Symptoms of a faulty part

• Webcam not recognised in Device Manager
• Black or grainy image in Teams/Zoom
• Camera drops out randomly during calls
• 'There is no camera connected' error on Windows Hello
• Microphone works but no image (shared flex)

Installation

🔴 Hard · Estimated time: 90 minutes · Required tools: Phillips PH00, T5 Torx, plastic pry tool, spudger, suction cup.
Remove the bottom cover, disconnect the battery, unclip the LCD bezel, swap the camera flex at the top of the display and route it back through the hinge to the motherboard connector.

Frequently asked questions

Does this cable fit the HP 840 G5?
No. The 840 G5 is 14" with a longer flex and a different part number.

Do I need to replace the camera module too?
Not necessarily — fit the new flex first and test. Replace the module only if the camera still fails.

Do I need a heat gun?
No, the LCD bezel is clipped; use plastic pry tools only to avoid damage.