{"product_id":"voor-oneplus-pad-2-pro-opd2413-ips-lcd-scherm-met-digitizer-volledige-montage-zwart","title":"LCD display with digitizer OnePlus Pad 2 Pro","description":"\u003cp\u003eDoes your OnePlus Pad 2 Pro (OPD2413) from 2024-2025 have a cracked, flickering or dead screen? This LCD display with digitizer (full assembly) swaps both LCD and touch as one unit. No laminator or OCA work required.\u003c\/p\u003e\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eLCD panel including touch digitizer\u003c\/li\u003e\u003cli\u003eFull assembly — ready to install\u003c\/li\u003e\u003cli\u003eOriginal resolution and brightness\u003c\/li\u003e\u003cli\u003eConnector clips onto the motherboard — no soldering\u003c\/li\u003e\u003cli\u003eIncludes polariser and backlight\u003c\/li\u003e\u003cli\u003eCompatible: OnePlus Pad 2 Pro (OPD2413)\u003c\/li\u003e\u003c\/ul\u003e\u003ch4\u003eSymptoms of a faulty part\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eScreen black, flickering or half dead\u003c\/li\u003e\u003cli\u003eTouch unresponsive or wrong location\u003c\/li\u003e\u003cli\u003eLines, blotches or dead pixels visible\u003c\/li\u003e\u003cli\u003eBacklight no longer works\u003c\/li\u003e\u003cli\u003eImage freezes or shows wrong colours\u003c\/li\u003e\u003c\/ul\u003e\u003ch4\u003eInstallation\u003c\/h4\u003e\u003cp\u003e🔴 Difficulty: Hard. Time: about 70 minutes. Tools: Phillips screwdriver, Y000 bit, plastic spudger, suction cup and pick. Open the back, disconnect the battery, remove the old part and route the new one along exactly the same path before closing up.\u003c\/p\u003e\u003ch4\u003eFrequently asked questions\u003c\/h4\u003e\u003cp\u003e\u003cstrong\u003eDoes this part fit other OnePlus models?\u003c\/strong\u003e\u003cbr\u003eNo. It is specific to the OnePlus Pad 2 Pro (OPD2413). Other models have different dimensions, connectors or pinout.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need special software or calibration?\u003c\/strong\u003e\u003cbr\u003eNo. The part works straight away — no flash, no calibration. The phone picks it up on the next boot.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat's the minimum toolset needed?\u003c\/strong\u003e\u003cbr\u003eA Phillips screwdriver, a Y000 bit, a plastic spudger and a suction cup are enough. No soldering.\u003c\/p\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"Does this part fit other OnePlus models?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"No. It is specific to the OnePlus Pad 2 Pro (OPD2413). Other models have different dimensions, connectors or pinout.\"}}, {\"@type\": \"Question\", \"name\": \"Do I need special software or calibration?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"No. The part works straight away — no flash, no calibration. The phone picks it up on the next boot.\"}}, {\"@type\": \"Question\", \"name\": \"What's the minimum toolset needed?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"A Phillips screwdriver, a Y000 bit, a plastic spudger and a suction cup are enough. No soldering.\"}}]}\u003c\/script\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"HowTo\", \"name\": \"Replace the LCD display with digitizer (full assembly) on OnePlus Pad 2 Pro (OPD2413)\", \"totalTime\": \"PT70M\", \"tool\": [{\"@type\": \"HowToTool\", \"name\": \"Phillips screwdriver\"}, {\"@type\": \"HowToTool\", \"name\": \"Y000 bit\"}, {\"@type\": \"HowToTool\", \"name\": \"Plastic spudger\"}, {\"@type\": \"HowToTool\", \"name\": \"Suction cup\"}, {\"@type\": \"HowToTool\", \"name\": \"Plastic pick\"}, {\"@type\": \"HowToTool\", \"name\": \"Hair dryer or heat mat\"}, {\"@type\": \"HowToTool\", \"name\": \"Tweezers\"}], \"step\": [{\"@type\": \"HowToStep\", \"position\": 1, \"name\": \"Power off the OnePlus Pad 2 Pro and remove the SIM tray.\", \"text\": \"Power off the OnePlus Pad 2 Pro and remove the SIM tray.\"}, {\"@type\": \"HowToStep\", \"position\": 2, \"name\": \"Gently heat the back and lift with suction cup and pick.\", \"text\": \"Gently heat the back and lift with suction cup and pick.\"}, {\"@type\": \"HowToStep\", \"position\": 3, \"name\": \"Unscrew the motherboard shield and disconnect the battery.\", \"text\": \"Unscrew the motherboard shield and disconnect the battery.\"}, {\"@type\": \"HowToStep\", \"position\": 4, \"name\": \"Release the old LCD display with digitizer (full assembly) f\", \"text\": \"Release the old LCD display with digitizer (full assembly) from its connector.\"}, {\"@type\": \"HowToStep\", \"position\": 5, \"name\": \"Place the new part along exactly the same path and lock it.\", \"text\": \"Place the new part along exactly the same path and lock it.\"}, {\"@type\": \"HowToStep\", \"position\": 6, \"name\": \"Reconnect the battery, close the device and test the functio\", \"text\": \"Reconnect the battery, close the device and test the function.\"}]}\u003c\/script\u003e","brand":"Sunsky","offers":[{"title":"Default Title","offer_id":54474246684995,"sku":"RPS0503B","price":88.46,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0567\/6256\/4706\/files\/RPS0503B_1.jpg?v=1778504758","url":"https:\/\/mackenners.com\/en\/products\/voor-oneplus-pad-2-pro-opd2413-ips-lcd-scherm-met-digitizer-volledige-montage-zwart","provider":"Mackenners","version":"1.0","type":"link"}