{"product_id":"voor-zte-blade-v50-design-4g-lcd-scherm-met-digitizer-volledige-montage-zwart","title":"LCD display with digitizer ZTE Blade V50 Design 4G","description":"\u003cp\u003eDoes your ZTE Blade V50 Design 4G from 2024 have a cracked, flickering or dead screen? This LCD display with digitizer (full assembly) swaps both LCD and touch as one unit. No laminator or OCA work required.\u003c\/p\u003e\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eLCD panel including touch digitizer\u003c\/li\u003e\u003cli\u003eFull assembly — ready to install\u003c\/li\u003e\u003cli\u003eOriginal resolution and brightness\u003c\/li\u003e\u003cli\u003eConnector clips onto the motherboard — no soldering\u003c\/li\u003e\u003cli\u003eIncludes polariser and backlight\u003c\/li\u003e\u003cli\u003eCompatible: ZTE Blade V50 Design 4G\u003c\/li\u003e\u003c\/ul\u003e\u003ch4\u003eSymptoms of a faulty part\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eScreen black, flickering or half dead\u003c\/li\u003e\u003cli\u003eTouch unresponsive or wrong location\u003c\/li\u003e\u003cli\u003eLines, blotches or dead pixels visible\u003c\/li\u003e\u003cli\u003eBacklight no longer works\u003c\/li\u003e\u003cli\u003eImage freezes or shows wrong colours\u003c\/li\u003e\u003c\/ul\u003e\u003ch4\u003eInstallation\u003c\/h4\u003e\u003cp\u003e🔴 Difficulty: Hard. Time: about 55 minutes. Tools: Phillips screwdriver, Y000 bit, plastic spudger, suction cup and pick. Open the back, disconnect the battery, remove the old part and route the new one along exactly the same path before closing up.\u003c\/p\u003e\u003ch4\u003eFrequently asked questions\u003c\/h4\u003e\u003cp\u003e\u003cstrong\u003eDoes this part fit other ZTE models?\u003c\/strong\u003e\u003cbr\u003eNo. It is specific to the ZTE Blade V50 Design 4G. Other models have different dimensions, connectors or pinout.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need special software or calibration?\u003c\/strong\u003e\u003cbr\u003eNo. The part works straight away — no flash, no calibration. The phone picks it up on the next boot.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat's the minimum toolset needed?\u003c\/strong\u003e\u003cbr\u003eA Phillips screwdriver, a Y000 bit, a plastic spudger and a suction cup are enough. No soldering.\u003c\/p\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"Does this part fit other ZTE models?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"No. It is specific to the ZTE Blade V50 Design 4G. Other models have different dimensions, connectors or pinout.\"}}, {\"@type\": \"Question\", \"name\": \"Do I need special software or calibration?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"No. The part works straight away — no flash, no calibration. The phone picks it up on the next boot.\"}}, {\"@type\": \"Question\", \"name\": \"What's the minimum toolset needed?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"A Phillips screwdriver, a Y000 bit, a plastic spudger and a suction cup are enough. No soldering.\"}}]}\u003c\/script\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\": \"https:\/\/schema.org\", \"@type\": \"HowTo\", \"name\": \"Replace the LCD display with digitizer (full assembly) on ZTE Blade V50 Design 4G\", \"totalTime\": \"PT55M\", \"tool\": [{\"@type\": \"HowToTool\", \"name\": \"Phillips screwdriver\"}, {\"@type\": \"HowToTool\", \"name\": \"Y000 bit\"}, {\"@type\": \"HowToTool\", \"name\": \"Plastic spudger\"}, {\"@type\": \"HowToTool\", \"name\": \"Suction cup\"}, {\"@type\": \"HowToTool\", \"name\": \"Plastic pick\"}, {\"@type\": \"HowToTool\", \"name\": \"Hair dryer or heat mat\"}, {\"@type\": \"HowToTool\", \"name\": \"Tweezers\"}], \"step\": [{\"@type\": \"HowToStep\", \"position\": 1, \"name\": \"Power off the ZTE Blade V50 Design 4G and remove the SIM tra\", \"text\": \"Power off the ZTE Blade V50 Design 4G and remove the SIM tray.\"}, {\"@type\": \"HowToStep\", \"position\": 2, \"name\": \"Gently heat the back and lift with suction cup and pick.\", \"text\": \"Gently heat the back and lift with suction cup and pick.\"}, {\"@type\": \"HowToStep\", \"position\": 3, \"name\": \"Unscrew the motherboard shield and disconnect the battery.\", \"text\": \"Unscrew the motherboard shield and disconnect the battery.\"}, {\"@type\": \"HowToStep\", \"position\": 4, \"name\": \"Release the old LCD display with digitizer (full assembly) f\", \"text\": \"Release the old LCD display with digitizer (full assembly) from its connector.\"}, {\"@type\": \"HowToStep\", \"position\": 5, \"name\": \"Place the new part along exactly the same path and lock it.\", \"text\": \"Place the new part along exactly the same path and lock it.\"}, {\"@type\": \"HowToStep\", \"position\": 6, \"name\": \"Reconnect the battery, close the device and test the functio\", \"text\": \"Reconnect the battery, close the device and test the function.\"}]}\u003c\/script\u003e","brand":"Sunsky","offers":[{"title":"Default Title","offer_id":54474244555075,"sku":"SPS7997B","price":162.42,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0567\/6256\/4706\/files\/SPS7997B.jpg?v=1778504678","url":"https:\/\/mackenners.com\/en-eu\/products\/voor-zte-blade-v50-design-4g-lcd-scherm-met-digitizer-volledige-montage-zwart","provider":"Mackenners","version":"1.0","type":"link"}